Filter
Top Products
2 TABLE OF CONTENTS
3 Introduction
4 Safety Information
5 Unpacking
6 Front Panel Controls
8 Rear Panel Connections
11 Main Remote Control Functions
15 Zone II Remote Control Function
17 Installation and Connections
17 Audio Equipment Connections
17 HDMI Input Connections
17 HDMI Output Connections
18 Video Equipment Connections
19 SCART A/V Connections
21 System and Power Connections
22 Speaker Selection
22 Speaker Placement
23 System Configuration
23 First Turn On
23 Using the On-Screen Display
23 System Setup
24 Input Setup
26 Surround Setup
27 Night Mode Settings
28 Configuring the Surround Off
(Stereo) Modes
28 Automated Speaker Setup Using EzSet/EQ
31 Manual Setup
31 Speaker Setup
34 Delay Settings
35 Output Level Adjustment
37 Operation
37 Surround Mode Chart
39 Basic Operation
39 Source Selection
39 Video Input Selection
40 6/8-Channel Direct Input
40 Controls and Use of Headphones
40 Surround Mode Selection
41 Digital Audio Playback
41 Dolby Digital
41 DTS
41 PCM Audio Playback
41 Selecting a Digital Source
42 Digital Bitstream Indicators
42 Surround mode Types
43 Surround Mode Post Processing
43 PCM Playback Indications
44 Speaker/Channel Indicators
44 Night Mode
45 Tape Recording
45 Using The Bridge
46 Output Level Adjustment
With Source Signals
46 Dim function
46 Memory backup
47 Multiroom Operation
47 Multiroom
47 Installation
47 Multiroom Setup
47 Surround Amplifier Channel Assignment
47 Multiroom Operation
49 Video Adjustments
49 Advanced Features
49 Front Panel Display Fade
50 Turn-On Volume Level
50 Semi-OSD Settings
50 Full-OSD Time Out Adjustment
51 Default Surround Mode
Table of Contents
Typographical Conventions
In order to help you use this manual with the remote control, front-panel controls and rear-panel
connections, certain conventions have been used.
EXAMPLE – (bold type) indicates a specific remote control or front-panel button, or rear-panel
connection jack
EXAMPLE – (OCR type) indicates a message that is visible on the front-panel information display
1
– (number in a square) indicates a specific front-panel control
0
– (number in a circle) indicates a rear-panel connection
0
– (number in an oval) indicates a button or indicator on the remote
å
– (letter in an oval) indicates a button on the Zone II remote
The appearance of the text or cursor for your receiver’s on-screen menus may vary slightly from the
illustrations in this manual.Whether the text appears in all uppercase or upper- and lowercase
characters, performance and operation remain the same.
Declaration of Conformity
We, Harman Consumer Group, Inc.
2, route de Tours
72500 Château-du-Loir,
FRANCE
declare in own responsibility, that the product
described in this owner’s manual is in compliance
with technical standards:
EN 55013:2001 + A1:2003
EN 55020:2002 + A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995 + A1:2001
EN 60065:2002
Jurjen Amsterdam
Harman Consumer Group, Inc.
04/07
51 Tuner Operation
51 Basic Tuner Operation
51 Station Selection
51 Preset Tuning
52 RDS Operation
52 RDS Tuning
52 RDS Display Options
52 Program Search
53 Programming the Remote
53 Programming the Remote with Codes
53 Direct Code Entry
53 Auto Search Method
53 Code Readout
54 Learning Codes from a Remote
54 Erasing Learned Codes
55 Macro Programming
55 Programmed Device Functions
56 Volume Punch-Through
56 Channel Control Punch-Through
56 Transport Control Punch-Through
57 Resetting the Remote Memory
58 Function List
60 Troubleshooting Guide
60 Processor Reset
61 Technical Specifications
62 Appendix - Settings Worksheet