Harman-Kardon 347 Stereo Receiver User Manual


 
4 SAFETY INFORMATION
Safety Information
Dolby* Digital, Dolby Digital EX and
Dolby Pro Logic*II and IIx Decoding,
and the full suite of DTS
®
modes,
including DTS-ES
®
6.1 Discrete & Matrix
and Neo:6
®
Seven channels of high-current amplifi-
cation with two channels assignable to
either surround back or multiroom
applications
Harman Kardon’s exclusive Logic 7
®
processing, along with a choice of
Dolby Virtual Speaker processing for
use when only two speakers are
available
Dolby Headphone to create spacious,
open sound fields when using head-
phones
Harman Kardon’s advanced EzSet/EQ
automatically configures speaker set-
tings and sets room equalization for
quick, easy and accurate system setup
HDMI with audio/video processing,
upscaling to 720p, 1080i/1080p
pass-through and repeater for
increased cable length without signal
degradation
Two HDMI
1.1 and three assignable
high-bandwidth analog component
inputs for compatibility with the latest
high-definition video sources
Front panel analog A/V inputs
Front panel digital inputs for easy con-
nection to portable digital devices and
the latest video game consoles
Connects to Harman Kardon’s
(optional) for charging, playback and
control of a compatible Apple
®
iPod
®
device
Input titling for all input sources
(except tuner)
Multiple digital inputs and outputs
On-screen menu and display system
A/V Sync delay adjustable for each
input delivers perfect lip sync with
digital programs or video displays
6-Channel/8-Channel Direct Input for
Use with Future Audio Formats
Extensive bass management options,
including four separate crossover
groupings
Extensive multiroom options, including
a standard Zone II remote, assignable
amplifier channels and A-BUS Ready
®
capability for listening to a separate
source in a remote zone
Main Remote with Internal Codes
Important Safety Information
READ THIS BEFORE OPERATING
YOUR UNIT.
Do not install this equipment in a confined space
such as a case or similar – Install it away from
direct sunlight, heat sources, vibration, dust,
moisture, and/or cold.
Avoid installing this unit where foreign objects
may fall onto this unit and/or this unit may be
exposed to liquid dripping or splashing. On the
top of this unit, do not place:
– Burning objects (i.e. candles), as they may
cause fire, damage to this unit, and/or
personal injury.
– Containers with liquid in them, as they may
fall and liquid may cause electrical shock to
the user and/or damage to this unit.
Do not cover this unit with a newspaper, table-
cloth, curtain, etc. in order not to obstruct heat
radiation. If the temperature inside this unit
rises, it may cause fire, damage to this unit,
and/or personal injury.
Install this unit near the AC outlet and where the
AC power plug can be reached easily.
This unit is not disconnected from the AC power
source as long as it is connected to the wall out-
let, even if this unit itself is turned off.This state
is called the standby mode. In this state, this unit
is designed to consume a very small quantity of
power.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
Verify Line Voltage Before Use
Your AVR has been designed for use with
220-240-Volt AC current. Connection to a line
voltage other than that for which it is intended
can create a safety and fire hazard and may
damage the unit.
If you have any questions about the voltage
requirements for your specific model, or about
the line voltage in your area, contact your dealer
before plugging the unit into a wall outlet.
Do Not Use Extension Cords
To avoid safety hazards, use only the power cord
attached to your unit.We do not recommend
that extension cords be used with this product.
As with all electrical devices, do not run power
cords under rugs or carpets or place heavy
objects on them. Damaged power cords should
be replaced immediately by an authorized service
depot with a cord meeting factory specifications.
Handle the AC Power Cord Gently
When disconnecting the power cord from an AC
outlet, always pull the plug, never pull the cord.
If you do not intend to use the unit for any
considerable length of time, disconnect the plug
from the AC outlet.
Do Not Open the Cabinet
There are no user-serviceable components inside
this product. Opening the cabinet may present a
shock hazard, and any modification to the prod-
uct will void your guarantee. If water or any
metal object such as a paper clip, wire or a
staple accidentally falls inside the unit, discon-
nect it from the AC power source immediately,
and consult an authorized service station.