Harman-Kardon 347 Stereo Receiver User Manual


 
16 ZONE II REMOTE CONTROL FUNCTIONS
Zone II.2 Remote Control Functions
I Digital Media Player (DMP)
Selector: When Harman Kardon’s
(optional) is connected to Digital
Media Player (DMP) Connector
8
and a
compatible Apple
®
iPod
®
is docked in ,
pressing this selector will select the iPod as the
audio source input device for the AVR 347. In
addition, if a video display is connected to one
of the Video Monitor Outputs
B
, the iPod’s
messages will appear on screen, and in the
Upper and Lower Display Lines
Ò
.The
/
¤
/
/
Buttons
DEa
, the Set
Button
F
and the Transport Controls
P
may be used to navigate the iPod and to operate
many functions. See page 45, and the manuals
for The Bridge and your iPod for more informa-
tion.
J Tuning Up/Down:When the tuner is in
use, these buttons will tune up or down through
the selected frequency band. If the Tuner Mode
button
I
has been pressed or the Band but-
ton
!
on the front panel was held pressed so
that AUTOappears in the Main
Information Display
Ò
, pressing either of
the buttons will cause the tuner to seek the next
station with acceptable signal strength for
quality reception.When the MANUAL appears
in the Main Information Display
Ò
,
pressing these buttons will tune stations in
single-step increments. (See page 51 for more
information.)
K Preset Up/Down:When the tuner is in
use, press these buttons to scroll through the
stations programmed into the AVR’s memory.
When CD or DVD is selected using the Input
Selector button
4
, these buttons may
function as Slow Fwd/Rev (DVD) or ”+10” (CD,
CDR).