Harman-Kardon 347 Stereo Receiver User Manual


 
ZONE II REMOTE CONTROL FUNCTIONS 15
ENGLISH
Zone II.2 Remote Control Functions
K
D
J
G
H
I
F
C
C
B
B
E
A
A Power Off
B AVR Selector
C AM/FM Tuner Select
D Input Selectors
E Disc Skip
F Volume Up/Down
G Mute
H Transport Controls
I /DMP Selector
J Tuning Up/Down
K Preset Up/Down
NOTE: The Zone II.2 remote may be used in
either the same room where the AVR is located,
or it may be used in a separate room with an
optional infrared sensor that is connected to the
AVR’s Multi IR input jack
d
. When it is used in
the same room as the AVR, it will control the
functions of the AVR or any compatible
Harman Kardon products in that room.When it
is used in a separate room via a sensor
connected to the Multi IR Jack
d
, the buttons
for power, input source, volume and mute will
control the source and volume for the second
zone, as connected to the Multi Out Jacks
b
.
(See page 47 for complete information on using
the Multiroom system.)
The Zone II remote may be used in either the
same room where the AVR is located, or it may
be used in a separate room with an optional
infrared sensor that is connected to the AVR’s
Multi IR input jack
d
or an A-BUS device.
A Power Off: When used in the room where
the AVR is located, press this button to place the
unit in Standby. When it is used in a remote
room with a sensor that is connected to the
Multi IR jack
d
, this button turns the Multi-
Room system off.
B AVR Selector: Press this button to turn on
the AVR. The input in use when the unit was last
on will be selected.
C AM/FM Tuner Select: Press this button to
select the Tuner as the input to the Multiroom
system. Press it again to change between the
AM and FM bands.
D Input Selectors: When the AVR is off,
press one of these buttons to turn the unit on
and to select a specific input.When the unit is
already in use, pressing one of these buttons will
change the input.
E Disc Skip: Press this button to change
discs on compatible Harman Kardon CD or DVD
changers.
F Volume Up/Down: When used in the
room where the AVR is located, press this button
to raise or lower the volume in that room.When
it is used in a remote room with a sensor that is
connected to the Multi IR Jack
d
, this button
will raise or lower the volume in the remote
room.
G Mute: When used in the room where the
AVR is located, press this button to temporarily
silence the unit.When it is used in a remote
room with a sensor that is connected to the
Multi IR Jack
d
, this button will temporarily
silence the feed to the remote room only. Press
the button again to return to the previous
volume level.
Important Note: No matter in which room the
Zone II remote is used, as with the main remote
it is important to remember to press the Input
Selector button D that corresponds to the
unit you wish to operate befor you change the
device to be controlled.
H Transport Control Buttons: These
buttons do not have any functions for the AVR,
but they are programmed for the forward/
reverse play operation of a wide variety of
Harman Kardon CD or DVD players, and audio or
video- cassette recorders.