Filter
Top Products
49
Setting up analog audio
www.gateway.com
To adjust the surround delay:
1 On the player’s remote control, press STOP, then press SETUP. The Welcome
to Setup screen opens.
2 Use your remote control’s arrow buttons to highlight Analog, then press
ENTER. The Analog audio setup menu opens.
3 Highlight Surr. Delay, then press the buttons to set the delay from
0 to 5.25 milliseconds.
Assume 1 millisecond of delay for every one foot of difference in distance.
For example, if your surround speakers are one foot closer than your front
speakers, set the surround delay to 1 millisecond.
4 Highlight OK, then press ENTER.