Filter
Top Products
39
CR300
<PRB1291-A>
3
Other tracks can also be replaced by repeating steps 1 and 2.
2
Select the new track number
with the numeric buttons.
• The track number can also be selected
with the or button.
Replacing a track in the program
1
When track No. is changed to 4
• This operation is available in stop mode
and after tracks have been
programmed. If the programmed tracks
are being played, stop playback before
proceeding to this operation.
Checking the programmed tracks
• Each press displays the track number programmed for each step of the program.
• When the button is pressed while the last step of the program is displayed, "00" is displayed.
Press again to display the first program step.
Press the CHECK button
of the remote control
unit.
• This operation is available in stop mode
and after tracks have been
programmed. If the programmed tracks
are being played, stop playback before
proceeding to this operation.
Programmed
track No.
Program step No.
Clearing a track from the program
Press the CLEAR
button of the remote
control unit.
• Each press clears the newest
track in the program.
Clearing the entire program
A
Press the stop ( ) button to stop
programmed playback, then press
the stop button again.
Press 2 times.
B Press the OPEN/CLOSE button.
The program can be cleared with either A or B below.
• If the button is pressed during
programmed playback, the tracks after
the track being played can be cleared.
Press the CLEAR button of
the remote control unit the
required number of times
until the program step with
the track number to be
replaced is displayed.