Filter
Top Products
10
CR300
<PRB1291-B>
CONNECTIONS
DIGITAL SIGNAL CONNECTION
(Before connecting this unit with other equipment, unplug the power cord from the wall outlet.)
CAUTION
Do not attempt to connect several units of the
CR300 in a series.
Caution in use of optical fiber cables
• Do not bend an optical fiber cable to a steep angle, for this could
damage the cable. Be specially careful when mounting the unit
in a rack, etc. When an optical cable is stored in the form of a
loop, the loop should have a diameter larger than 15 cm (6 in.).
• An optical cable should be inserted deep into the socket. Avoid
incomplete connection.
• Use optical cables with a length of no more than 3 m (10 feet).
• Be careful not to leave dust on or scratch the optical fiber cable
plugs. If the plug is dusty, wipe with a soft cloth before
connection.
• When the optical fiber cables are not connected, protect the
OPTICAL sockets on the rear of the unit against dust by inserting
dust protective caps into them.
Optical sockets are delicate!!
• When the OPTICAL sockets
are used, pull out the dust
protective caps from them. Be
sure to insert them again when
the OPTICAL sockets are not to
be used.
• Retain the dust protective caps
carefully.
Cap
Pull out.
Turn and remove
Cap
Digital input/output (coaxial) terminal cap
• Remove the black cap before using the digital input/output
terminal.
• Be sure to replace the black cap when not using the terminal.
DIGITAL IN BALANCED IN
BALANCED OUT
LINE IN LINE OUT
PARALLEL
REMOTE
SIGNAL
GND
XLR-3 CN WIRING
1. GND
2. HOT ( + )
3. COLD ( - )
RL RL
RL RL
DIGITAL IN DIGITAL OUT
OPTICAL COAXIAL
S/PDIF
OPTICAL COAXIAL
S/PDIF
AES
/ EBU
PUSH
PUSH
PUSH
AC IN
AES
/EBU
DIGITAL IN
PUSH
DIGITAL IN
OPTICAL
COAXIAL
S/PDIF
DIGITAL OUT
OPTICAL
COAXIAL
S/PDIF
OPTICAL
COAXIAL
DIGITAL
OUTPUT
OPTICAL
COAXIAL
DIGITAL
INPUT
DIGITAL
OUTPUT
AES / EBU
Connect to equipment
with a digital output
jack, such as a CD
player.
Connect to equipment
with digital input/output
jacks such as a DAT or
MD recorder.
AC
After completing
connections with
other equipment,
plug the power cord
into a wall outlet.
optical fiber cable
optical fiber cable
coaxial pin cables
coaxial pin cables
Connect to equipment with AES/
EBU digital output jacks such as
a professional DAT recorder.
XLR cable
Align the connector with the
shape of the socket and
insert fully into the socket.
SRC(Sample Rate Converter)
condition can be set using the MENU
button functions. (See page 24)
Digital Out condition
can be set using the
MENU button functions.
(See page 24)