Filter
Top Products
28
CR300
<PRB1291-A>
• Checking the recording end point from the middle of a disc
1
Press the RECORD
(REC ) button(s) to
initiate the record-
pause mode.
2
Press and hold the
reverse search
button in the
record-
pause mode.
Press two buttons
together.
The played position is moved backward and
reverse play sound is heard while the button is
held depressed.
When the button is released, the previous re-
cording is played until the end point, where the
unit enters record-pause mode again.
• Holding the ( or ) button
depressed allows you to move the
played position backward by about
2 minutes from the recording end
point.
• Pressing the RECORD (REC )
button(s) during playback puts the unit
back to record-pause mode again.
• Pressing the ( or ) button
allows forward manual search of the
recording end point.
• The indicator turns off during
playback until the recording end point.
2
1
FADER
TRACK NO.
WREITE
REC
CONVENIENT FUNCTIONS FOR RECORDING