Filter
Top Products
22
CR300
<PRB1291-A>
Press the pause ( )
or play ( ) button in
record-pause mode.
• This unit starts recording.
• Start playback of the source
player after having started
the recording of this unit.
or
or
ANALOG-SOURCE RECORDING
5
After recording, press the stop
( ) button to end recording.
1
Load a CD-R or CD-
RW disc containing
a
recordable space.
For a disc loading, refer to
page 15.
2
3
Adjust the recording level.
Refer to page 23 for the
adjustment method.
4
6
Press two buttons
together.
Label side
This function is for recording the analog output.
• This unit enters record-pause mode.
• Check the copy bit indicator
(refer to page 24).
• After loading the disc, check that
the CD-R or CD-RW indicator
stops blinking and starts to light
steadily.
In case it does not light steadily,
refer to page 42.
• Start playback of the
source player.
• Press the PAUSE ( ) or PLAY
( ) buttons after the counter
displays "00:00".
• "PMA REC" is displayed and the unit
stops after recording the track data.
0
8
6
7
9
5
10
4
1
2
3
REC LEVELREC LEVEL
LR
•
••
•
•
•
•
•
•
•
ANALOGDIGITAL
INPUT SELECTOR
OPT
AES /
EBU
LIN
E
COAX XLR / -10
XLR / +4
•
•
•
•
•
•
3
56
241
REPEAT
FADER
TRACK NO.
WREITE
REC
Set the INPUT SELECTOR
to
ANALOG
.
Select the analog input to be recorded.
XLR/+4 or XLR/-10 or LINE
• Track numbers are automatically up-
dated when the AUTO TRACK indicator
is on.
• Track numbers are automatically up-
dated if the following signal is input after
2-seconds of ”no signal” condition.
• In the case of analog source, the CR300
detects the signal level selected by the
”Automatic Track Number Renewal Lev-
el Sensitivity Setting” menu as ”no sig-
nal”. Track numbers are automatically
updated if the signal level exceeds this
level. (See page 24.)
• Therefore recordings of classical music
and other music styles with long silent
passages will be recorded on more
tracks than required. Turn off the auto
track function and create new tracks
manually to avoid this problem.
Press the RECORD
(REC ) button(s).