Filter
Top Products
14
CR300
<PRB1291-B>
CONTROLS AND INDICATORS
REMOTE CONTROL UNIT
● Wireless remote control
Caution on the remote control operation
• Remote control might not work if there is an obstacle
between the remote control unit and the CR300 or if the
remote control unit is operated at too great of an angle
from the remote control sensor.
• Erroneous operation may occur in strong light such as
direct sunlight or fluorescent lamp light shining into the
remote control sensor.
• The CR300 may operate erroneously if it is used near
equipment radiating infrared rays or if the infrared remote
control unit of other equipment is used near the CR300.
On the contrary, if this remote control unit is operated
near another piece of equipment which can be controlled
with infrared rays, that equipment might not work
correctly.
• Replace batteries when the remote controllable range
decreases noticeably.
Remote controllable range
30
30
7m(23 ft)
Remote control sensor
Point the remote control
unit and press its buttons.
● Parallel remote control
The CR300 can be controlled through the rear panel
parallel remote control input connector and also with
the wireless remote controller included with the
CR300.
1
2
4
6
8
7
3
5
GND
PLAY
PAUSE
Not Use
REC
STOP
MANUAL TRACK NO WRITE
Operations performed by buttons marked "❋" can
also be carried out by using buttons with the same
name on the main unit (See page 12).
Acceptance of commands from
the wireless remote controller
by the CR300 can be set using
the MENU button function.
(See page 24)
The CR300 can be controlled with external switches by
utilizing the circuit shown below.
PARALLEL
REMOTE
DIN 8 pin connector
123
456
789
10
10
TIME
PGM CHECK CLEAR
REPEAT
FADER
TRACK NO.
WREITE
MODEL 8317
REC
❋ Record muting button
❋ Manual TRACK NO.
WRITE button
Numeric buttons
(1 to 10, >10)
❋ Time button
(TIME)
❋ Program clear button
(CLEAR)
❋ Record buttons
(REC)
NOTE:
For recording,
press the 2 buttons simultaneously
FADER button
PEPEAT button
❋ Manual search button
❋ Track search button
❋ Stop button
❋ Pause button
❋ Play button
Program button
(PGM)
Program check button
(CHECK)