Filter
Top Products
34
CR300
<PRB1291-A>
Load a CD-RW disc which has
been recorded on.
For a disc loading, refer to page 15.
C. All tracks erasing
Label side
1
2
Press the ERASE button twice
(once to start last track erasing or
TOC erasing).
• The function indicator blinks in orange indicating that the
recorder is in all tracks erase standby mode.
3
•
During All tracks erasing of a CD-RW disc that has not be finalized, "ALL", "TRACK" and
"ERASE" blink successively.
•
During All tracks erasing of a finalized CD-RW disc, "ERS
*
:
**
" while the remaining time
is displayed.
Press the pause ( ) button to start
the all tracks erasing.
• The recorder stops when All tracks erasing is completed.
•
All tracks erase is completed in several
seconds for a CD-RW.
D. All disc erasing (takes recordable time plus 5 minutes)
Press and hold the ERASE button
for about 4 seconds.
• The display panel displays "ALL," "DISC," "ERASE?" and
"dE
**
:
**
"
successively.
Then the function indicator blinks in orange indicating that the recorder is in the All disc
erase standby mode.
3
• The function indicator lights in orange and
All Disc Erasing starts.
•
During All disc erasing, "dE
**
:
**
" while the remaining time is displayed.
Press the pause ( ) button to start
the all disc erasing.
• The recorder stops when All disc erasing is completed.
1
2
•
You can stop the erase process by
pressing the Stop (
) button for 10
seconds. However, if the erase
operation is stopped, the message
"CHECK", "DISC" appears to indicate
that the disc has not been normally
erased.
• The function indicator lights in orange and
All Tracks Erasing starts.
In the case of a CD-RW which has not been finalized, do not allow more than 8 seconds to
elapse after step 2 has been performed before proceeding with step 3.
Load a CD-R or CD-RW disc which
has been recorded on.
For a disc loading, refer to page 15.
Label side
3
2
1
Function indicator
REPEAT
FADER
TRACK NO.
WREITE
REC
ERASING (CD-RW ONLY)