Filter
Top Products
Front/Top
The illustration shows a standard zoom lens installed.
Name Function
A
Handle
Use these handles when carrying the projector. Also,
you can pass an anti-theft wire lock through the handles
to secure the projector. s p.38
Caution
Do not carry the projector by one person.
Two people are needed to unpack or carry the pro-
jector.
Name Function
B
Security slot( )
The Security slot is compatible with the Microsaver
Security System manufactured by Kensington.
s p.38
C
Air intake vent
(Air filter)
Takes in air to cool the projector internally. If dust
collects here it can cause the internal temperature to
rise, and this can lead to problems with operation and
shorten the optical engine's service life. Be sure to clean
the Air filter regularly.
s
p.70, p.77
D
Front adjustable foot
When set up on a desk, turn to extend and retract to
adjust the horizontal tilt.
The front adjustable feet can be removed when the
projector is mounted on the ceiling. s Quick Start Guide
E
Front cover
Remove this cover to remove or install the lens unit
when replacing the lens. s p.86
This cover must be installed when using the projector.
F
Remote Receiver
Receives signals from the remote control. s Quick
Start Guide
G
Interface cover
Remove this cover to connect cables to the ports inside
when connecting the projector to video equipment.
s Quick Start Guide , p.10
H
Projection lens
Images are projected through here.
I
Interface cover open/
close switch
Opens and closes the interface cover. s Quick Start
Guide
J
Ceiling mount fixing
points
(Four points)
Attach the optional Ceiling mount here when
suspending the projector from a ceiling. s p.68,
p.79
Part Names and Functions
9