Info Menu (Display Only)
Lets you check the status of the image signals being projected and the status of the projector. Items that can be displayed vary depending on the image
signal being projected as shown in the following screen shots.
Analog RGB/Digital RGB/
Component Video
g
/Digital Component Video
Composite video
g
/S-Video
g
Sub Menu Function
Lamp Hours
You can display the cumulative lamp operating time
*
.
When it reaches the lamp warning time, the characters are displayed in yellow.
Lamp Status
The following icons show the status of the lamps.
: Lighted : Disable
When
is displayed, the lamp is not operating normally. See "Reading the Indicators". s p.55
Source
You can display the Source name for the connected equipment currently being projected.
Input Signal
You can display the content of Input Signal set in the Signal menu according to the Source.
Resolution
You can display the Resolution.
Video Signal
You can display the content of Video Signal set in the Signal menu.
Refresh Rate
g
You can display the Refresh Rate.
Sync Info
You can display the image signal Info.
This information may be needed if service is required.
Status
This is Info about errors that have occurred on the projector.
This information may be needed if service is required.
List of Functions
51