Filter
Top Products
a still photo. Also, you can perform operations such as changing
between files during presentations from a computer without projecting
any images if the freeze function is activated beforehand.
Procedure
Remote Control
Each time you press the button, Freeze turns on or off.
q
• The image source continues to play back the moving images
even while Freeze is on, and so it is not possible to resume
projection from the point where it was paused.
• If the [Freeze] button is pressed while the configuration menu or
a Help screen is displayed, the menu or Help screen being
displayed is cleared.
• Freeze still works while E-Zoom is being used.
Changing the Aspect Ratio
Change the Aspect Ratio
g
when video equipment is connected so that
images that have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format. Change the Aspect Ratio when
projecting computer images at full size. The changing methods and the
types of Aspect ratio are as follows.
Changing methods
Procedure
Remote Control
The Aspect name is displayed on the screen by pressing the button.
If you press the button while the Aspect name is displayed on the
screen, it changes to the next Aspect Mode.
q
The aspect mode can also be set using Aspect in the Signal
menu from the configuration menu. s p.43
Changing the Aspect for video equipment images
Each time the button is pressed, the aspect changes in the order
Normal, 16:9, Full, Zoom, and Native.
Functions for Enhancing Projection
22