Filter
Top Products
Sub Menu Function
Noise Reduction
(This cannot be set when a digital RGB signal is input)
Smoothes out rough images. There are two modes. Select your favorite setting. It is recommended that this is set to Off when viewing image
sources in which noise is very low, such as for DVDs.
DVI/HDMI Video Range
(This cannot be set when a digital RGB signal is input)
When the projector's DVI-D input port or HDMI input port is connected to a DVD player, the projector's video range is set according to the DVD
player's video range setting.
Input Signal
You can select an input signal from Computer input port or BNC input port.
If Auto is set, the input signal is identified automatically according to the connected equipment.
If colors do not appear correctly when this is set to Auto, select the appropriate signal according to the connected equipment.
Video Signal
You can select input signal from Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image or
a problem occurs such as no image is being projected when set to Auto, select the appropriate signal according to the connected equipment.
Aspect
You can set the
Aspect Ratio
g
for projected images. s p.22
Overscan
(This cannot be set when a digital RGB signal is input)
The range of projected image can be set to 4% or 8%. You can select Auto only when the input source is HDMI. When Auto is selected, the range
is automatically switched to Off or 8% according to the input signal. However, the automatic setting is only effective when the video equipment is
connected via the projector's HDMI port.
Reset
You can reset all adjustment values on the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s p.52
List of Functions
44