Filter
Top Products
Quick Installation Guide
15
March 2013
Step 4: Configure
NOTE:
If the transmitter is pre-configured at the factory, it is only necessary to proceed with the
following steps if you need to verify or change the settings.
Basic configuration can easily be done either with Rosemount Radar Master, a
Field Communicator, the AMS™ Suite, DeltaV
®
, or any other DD (Device
Description) compatible host system. For advanced configuration features,
Rosemount Radar Master is recommended.
Rosemount Radar Master Guided Setup includes a Wizard for Basic Configuration
and a Device Specific Setup which are sufficient for most cases. Further
configuration options are available using the Setup Functions, as described in the
Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).
Configuration with Rosemount Radar Master Guided Setup is described on the
following pages and the corresponding Field Communicator fast key sequence
and F
OUNDATION fieldbus parameters are given.
Help is accessed by selecting the Contents option from the Help menu. Help is
also available through a Help button in most windows.
The configuration instructions in this Quick Installation Guide cover standard
installations. For more complicated situations, such as interface applications or
for installations that have disturbing objects within the radar beam etc, see the
Rosemount 5300 Series Reference Manual (Document No. 00809-0100-4530).
Installing the Rosemount Radar Master software
To install Rosemount Radar Master:
1. Insert the installation CD into the CD-ROM drive.
2. Follow the instructions. If the installation program does not start
automatically, run Setup.exe from the CD.