Filter
Top Products
PowerH SERIES
Owner’s Manual 23
CONFIG/Menu Service: The menu entry Menu Service
branches to the SERVICE submenu. The entries in the SERVICE
menu are explained in detail in paragraph Structure of the
CONFIG/SERVICE menu (see page 26).
CONFIG/Amplifier Name: Displays the name of the power
amplifier. The menu entry only exists when no RCM-26 is installed
in the power amplifier. With a remote control module installed, the
power amplifier has to be named via IRIS-Net™. Pressing the
ENTER button opens the Set Amplifier Name dialog box.
The Set Amplifier Name dialog allows changing the power
amp’s name, which can be composed of a maximum of 20
symbols and consist of all letters a-z, A-Z, the numbers 0-9 and
special characters.
Pressing the Up/Down buttons locates the cursor at the desired
position of the name. Pressing the ENTER button accepts the
desired symbol and moves the cursor to the next character.
Pressing the ENTER button after manipulating the last character,
stores the desired name of the power amplifier in the memory and
the display returns to the CONFIG menu.
The following special characters provide special functions when entering a power amp’s name:
Structure of the CONFIG/EVENT LOG menu
CONFIG/EVENT LOG/Counter POWER UP: This menu item
shows how many times the power switch on the front panel has
been used.
CONFIG/EVENT LOG/Counter AMP ON: This menu item shows
how often the power amplifier has been activated from the OFF or
STANDBY state.
Character Function
↵ Accepts the entered name and returns to the menu.
A
Deletes the currently selected symbol and moves the cursor by one character to the right.
I
Set the cursor by one character to the left.
Table 3.2: Functions of special characters when entering the power amp’s name