Filter
Top Products
Merge In > Thru
By setting the Merge In>Thru option to ON, incoming MIDI CC and program change messages
are routed out of the GSP1101’s MIDI Thru jack to other connected MIDI devices. These
messages do not pass through the GSP1101 when the Merge In>Thru is set to OFF. This option
is set to ON from the factory.
To configure the MERGE IN > THRU option
1. From the Preset screen, press the Edit/Select knob.
2. Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
3. Turn the Edit/Select knob until Merge In->Thru is selected.
4. Press the Edit/Select knob to turn the option on or off.
5. Press the Back button to return to the previous menu.
Send MIDI Prgms
By setting the Send MIDI Prgms option to ON, MIDI program change messages will be sent out
the GSP1101’s MIDI Thru jack when presets are changed on the GSP1101 either by the front
panel Edit/Select knob, by selecting them in the editor librarian, or when the GSP1101 receives a
program change message via MIDI. These MIDI program change messages do not get sent out of
the GSP1101 when Send MIDI Prgms is set to OFF. This option is set to OFF from the factory.
MIDI Tempo
The GSP1101’s MIDI Tempo option allows incoming MIDI time code to set the delay time of
the delay effects. When this option is set to ON, the GSP1101 delays respond to MIDI time
messages it receives.
To set the MIDI Tempo
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
Turn the Edit/Select knob until Merge Tempo is selected.
Press the Edit/Select knob to turn the option on or off.
Press the Back button to return to the previous menu.
Preset Load
From the factory the GSP1101 is set to automatically load presets when they are selected using
the Edit/Select knob. Presets can be loaded manually if needed by setting the Preset Load option
to MANUAL. This way you can cue up a preset and it is not loaded until the Edit/Select knob is
pressed. If you don’t load a preset after four seconds, the numeric display returns to the current
preset.
To set the Preset Load setting
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until Preset Load is selected.
Press the Edit/Select knob to choose between AUTO or MANUAL option.
Press the Back button to return to the previous menu.
1.
2.
3.
4.
5.
1.
2.
3.
4.
0
GSP0 Owner’s Manual
Global Functions