Filter
Top Products
Combo, American Tube Stack, American Solid State Stack, British Tube Combo, British
Class A Combo, British Solid State Combo, British Tube Stack, British Solid State Stack.
Cabinet to Amp
This option lets you route the guitar audio through the GSP1101’s cabinet modeling or
around it before it is sent to the 1/4” Line Outputs.
To configure the 1/4” Line Outputs
From the Preset screen, press the Edit/Select knob once to enter the Main Menu
screen.
Turn the Edit/Select knob until the I/O Setup menu is selected and press the knob
again.
Turn the Edit/Select knob until 1/4” Line Output Setup is selected and press the
knob. Select from the three options and setup each based upon how the GSP1101 is
connected to your system.
Press the Back button to exit.
Changes made in the 1/4” Output Setup menu are saved automatically and will affect the
global performance of the GSP1101 and its presets.
XLR Out Level
The XLR Mixer Outputs can be set to different output levels. These options include fixed
-10dBV, fixed +4dBu, or Variable. When the fixed output levels are selected, the front panel
Output Level does not control the output of the XLR Mixer Outputs. If there is a need to
vary the output level of the XLR Mixer Outputs, Variable should be selected which links the
Output Level on the front panel to control their output level.
To change the XLR Out Level
From the Preset screen, press the Edit/Select knob once to enter the Main Menu
screen.
Turn the Edit/Select knob until the I/O Setup menu is selected and press the knob
again.
Turn the Edit/Select knob until XLR Out Level is selected and press the knob. Select
from the three output level options.
Press the Back button two times to exit back to the Preset screen.
Changes made in the XLR Out Level menu are saved automatically and will affect the global
performance of the GSP1101 and its presets.
XLR Output
The GSP1101 XLR Mixer outputs are set to stereo by default. If there is a need to only use
one of these outputs, it is best to switch them to be mono outputs (both outputs sum the
left/right channels to mono and output the same signal in each output).
1.
2.
3.
4.
1.
2.
3.
4.
Global Functions
GSP0 Owner’s Manual