Filter
Top Products
EXPRESSION LINKS
Each preset in the GSP1101 can have up to 8 expression links for real-time parameter
control during performance. Parameters can be assigned to MIDI CCs, internal LFOs or
to expression pedals. The way in which the GSP1101 provides control over parameters
is via Global Controllers. These Global Controllers are configured in the CC/Controller
Map menu (see page 49). There are 16 Global Controllers that can be assigned in any way
to any of the GSP1101 presets. These Global Controllers must be setup first before any
Expression Links can be made in presets (see CC/Controller Map on page 49 for more
information on setting up Global Controllers). From the factory, the Global Controllers
have been assigned to some MIDI CCs already, but feel free to make changes to these
assignments for your own needs.
To assign Expression Links to parameters via the Expression Links screen
From the Preset screen, press the Edit/Select knob twice. This takes you to the Preset
Edit screen.
Turn the Edit/Select knob to highlight the “EXPRESSION LINKS” menu and press the
Edit/Select knob. The “Edit Expression Links“ screen will be displayed.
In the “Edit Expression Links” screen, there is a numbered list. The numbers on the
left side of the screen each represent an Expression Link. For this example, highlight “3
NO CTRL NO LINK” and press the Edit/Select knob. “Linking NO LINK” will be
displayed and “ASSIGN CONTROLLER” will be highlighted in the display.
Use the Edit/Select knob to scroll to the “LINKED TO NO LINK” menu and press
the knob. “LINKING CTRL NO CTRL TO” will be displayed.
Use the Edit/Select knob to select the parameter from the GSP1101’s available
parameters you want linked. For our example we will link WAH PEDAL. Once you
have the parameter selected, press the Back button.
Use the Edit/Select knob to scroll up to the “ASSIGN CONTROLLER” menu and
press the knob. “Linking WAH PEDAL CONTROLLER=NOT LINKED” will be
displayed.
Use the Edit/Select knob to select which of the 16 Global Controllers or 2 LFOs you
want to control the parameter. For our example we will select “CONTROLLER=12
<CC 7>. Press the Back button to return to previous menu.
The Wah Pedal parameter is now linked to be controlled by MIDI CC 7. You can now
adjust the parameter’s Min and Max ranges by entering the “MIN VALUE” and “MAX
VALUE” menus if you don’t want to use the parameter’s full range, which is the default.
Store these changes to the preset using the Store procedure if these changes are to be
recalled later.
Expression links can also be assigned directly from the parameter you want to link to.
1.
2.
3.
4.
5.
6.
7.
8.
9.
0
GSP0 Owner’s Manual
The Edit Effects/Preset Screen