Filter
Top Products
Turn the Edit/Select knob until Channel is selected and press the knob.
Use the Edit/Select knob to change which MIDI channel you would like the GSP1101 to
receive preset and CC information on. The channel range is OFF 1-16, and ALL. Setting the
channel to ALL will set the GSP1101 to respond to all MIDI preset and CC messages on all
MIDI channels.
Press the Back button to return to the previous menu.
Preset Map
The MIDI Preset Map feature allows you to access any of the GSP1101’s presets using standard
MIDI program change messages. From the factory, the GSP1101 is set to access User presets 1-99
with MIDI program change numbers 1-99. MIDI program change numbers 101-128 access Factory
programs 1-28. The GSP1101 can respond to incoming MIDI preset messages and change to those
presets. Sometimes, incoming MIDI preset messages need to be remapped (MIDI preset 1 should
change to GSP1101 preset 12). The MIDI Preset Map menu is where these functions are set.
To map MIDI program change numbers
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
Turn the Edit/Select knob until MIDI Preset Map is selected and press. This enters the MIDI
preset mapping menu.
The top line of the Preset Map menu selects the MIDI program number that you want to
map to a GSP1101 preset. The bottom line of the Preset Map selects the internal preset the
GSP1101 will recall for the selected MIDI program number.
Press the Back button to return to the previous menu.
CC/Controller Map
The GSP1101 uses a Global Controller map for routing incoming MIDI CC and Expression Pedal
messages to Expression Links within in a preset. There are 16 Global Controllers, each of which
can be assigned to a different MIDI CC or the Expression Pedal. Once these Global Controllers are
set up, you can then link up to eight Controllers to individual parameters in presets for customized
functionality. From the factory, the Global Controllers have been assigned to some MIDI CCs
already, but feel free to make changes to these assignments for your own needs.
To set up the Global Controller mapping
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
Turn the Edit/Select knob until CC/Controller Map is selected and press the Edit/Select
knob. This enters the MIDI CC/Controller mapping menu.
Turn the Edit/Select knob to select one of the 16 Global Controllers you want to map a MIDI
CC to and press the Edit/Select knob.
Turn the Edit/Select knob to select the MIDI CC number you want this controller to respond
to (0-127).
Press the Back button to return to the previous menu and repeat steps 3 and 4 for other
global controllers.
Press and hold the Back button to return to the Preset screen.
3.
4.
5.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
6.
7.
GSP0 Owner’s Manual
Global Functions