Filter
Top Products
DECLARATION OF
CONFORMITY
Manufacturer’s Name: DigiTech
Manufacturer’s Address: 8760 S. Sandy Pkwy.
Sandy, UT 84070, USA
Declares that the product:
Product name: GSP 1101
Note: Product name may be suffixed by the letters-EU.
Product option: None
Conforms to the following Product Specifications:
Safety: IEC 60065 (7th ed. 2001)
EMC: EN 55013 (2001 + A1)
EN 55020 (1998)
Supplementary Information:
The product herewith complies with the requirements
of the Low Voltage Directive 73/23/EEC and the
EMC Directive 89/336/EEC as amended by Directive
93/68/EEC.
Vice-President of Engineering-MI
8760 S. Sandy Parkway
Sandy, Utah 84070, USA
Date: April 9, 2007
European Contact: Your local Digitech
Sales and Service Office or
Harman Music Group
8760 S. Sandy Pkwy.
Sandy, UT
84070 USA
Ph: (801) 566-8800
Fax: (801) 566-7005
IMPORTANT SAFETY INSTRUCTIONS
ELECTROMAGNETIC
COMPATIBILITY
This unit conforms to the Product Specifications noted
on the Declaration of Conformity. Operation is
subject to the following two conditions:
this device may not cause harmful
interference, and
this device must accept any interference
received, including interference that may cause
undesired operation.
Operation of this unit within significant
electromagnetic fields should be avoided.
use only shielded interconnecting cables.
•
•
•
U.K. MAINS PLUG WARNING
A molded mains plug that has been cut off from
the cord is unsafe. Discard the mains plug at a
suitable disposal facility.
NEVER UNDER ANY CIRCUMSTANCES
SHOULD YOU INSERT A DAMAGED
OR CUT MAINS PLUG INTO A 13 AMP
POWER SOCKET.
Do not use the mains plug without the fuse
cover in place. Replacement fuse covers can be
obtained from your local retailer. Replacement
fuses are 13 amps and MUST be ASTA approved
to BS1362.