Filter
Top Products
Select a frequency by turning Edit/Select knob.
Press the Edit/Select knob and turn the knob to make adjustments.
Press the Edit/Select knob again to de-select that frequency.
Press the Back button to return to the previous menu.
Changes made in the Global EQ menu are saved automatically and will affect the global
performance of the GSP1101 and all of its presets.
Contrast
The GSP1101’s LCD has a contrast control to make it viewable at almost any viewing angle.
To adjust screen contrast
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until Contrast is selected and press the knob. This enters
the Contrast adjustment menu.
Turn the Edit/Select knob until the display contrast is at the desired setting.
Press the Back button to return to the previous menu.
Version
This non-selectable option tells you the version number of the installed firmware. This is
useful in the event there are firmware updates.
MIDI Menu
The GSP1101 offers comprehensive MIDI implementation for use with external MIDI
hardware and software controllers. The MIDI menu is where all MIDI related control is
programmed. The MIDI menu also is where the global CC/Controller map is programmed
which provides the link between outside MIDI messages to control internal GSP1101
effects parameters. By assigning each CC message to a Controller, and then assigining the
Controller to a parameter, you can change MIDI footswitches, and you only need to remap
the new CCs to the previously assigned Controllers. Your presets will react as they always
did. This eliminates the need to rewrite all your presets to adapt to your new foot pedal.
Channel
The GSP1101 can respond to preset and CC messages as long as these messages are on the
channel selected by the GSP1101.
To set the MIDI channel
From the Preset screen, press the Edit/Select knob.
Turn the Edit/Select knob until the MIDI menu is selected and press the knob.
3.
4.
5.
6.
1.
2.
3.
4.
1.
2.
GSP0 Owner’s Manual
Global Functions