Filter
Top Products
Using the GSP0
GSP0 Owner’s Manual
Using the GSP1101
GSP1101 Basics
The GSP1101 lets you choose from 99 presets, each one a different combination of effects,
amp and cab models, EQ and other settings. You can edit, rename, and save presets as
well. Note that there are 99 Factory presets and 99 User presets. When shipped from the
factory, the Factory and User presets are identical. You can only store changes to the User
presets. See page 13 for more information about using presets.
Using DigiTech’s exclusive Tone and Effect Libraries, you can also select ready-made
combinations of distortion/amp tones using combinations of post-amp effects (Chorus,
Modulation, Pitch, Delay, and Reverb). Press either the Tone Library or Effects Library
button to gain access to simple-to-use building blocks that will help you create your sound.
See page 14 for more information about the Tone and Effects Libraries.
The Preamp knobs on the front panel give you easy access to Gain, Bass, Midrange, Treble,
and Amp Level settings.
The GSP1101 supports up to eight expression links per preset that can control parameters
in real-time. With expression links, you can assign parameters to be controlled by MIDI
CCs, internal LFOs, or an expression pedal. See page 40 for more information.
Since there are many possible ways to connect the GSP1101 to different amps and audio
systems, the best place to start is by using the Setup Wizard. The Setup Wizard asks you a
few simple questions about how your rig is connected. Through the following screens you
will be given several options that will help optimize the GSP1101 with your rig.