Filter
Top Products
Others
36
ENGLISH
ENGLISH
Symptom Cause Measures Page
Troubleshooting
If a problem should arise, first check the following.
1. Are all connections proper ?
2. Have you operated the player according to the Operating Instructions ?
If this unit is not operating properly, check the items listed in the table below. Should the problem persist,
there may be a malfunction. Disconnect the power immediately and contact your store of purchase.
Display does not light and
no sound is produced
when power is turned on.
• Power supply cord is not plugged into
power outlet.
•Plug the power supply cord into the
power outlet.
11
¢System
No sound is produced or
sound is distorted.
•Incomplete connections with the
various devices.
• The receiver’s function setting or
adjustments are not right.
• Check the connections.
• Check the receiver’s function and
controls and adjust as necessary.
11
—
Display is dim. • Dimmer function is on. • Turn the dimmer function off by
pressing the DIMMER button on the
remote control unit.
15
Symptom Cause Measures Page
“No Disc” is shown on
the display even though
a CD is loaded.
•The disc is not properly loaded. • Reload the disc. 4
¢CD
Disc is not played when
1/3 button is pressed.
• The disc is dirty or scratched. • Wipe the dirt off the disc or replace
the disc.
4
A specific part of a disc
is not played.
• The disc is dirty or scratched. • Wipe the dirt off the disc or replace
the disc.
4
A CD-R or CD-RW disc
cannot be played.
• The disc has not been finalized.
• The recording conditions are bad or
the quality of the disc itself it poor.
• Finalize the disc then play it.
• Use a properly recorded disc.
4
—
MP3 and WMA files
cannot be played.
• The file formats, extensions or settings
made when disc was created are not
compatible with the CHR-F103.
•Create discs with file formats,
extensions or settings compatible
with the CHR-F103.
24
CD disc information is
not displayed.
•You are not connected to the network.
• The CD information is not included in
the Gracenote database on the HDD.
• Connect to the network. 12
12
Symptom Cause Measures Page
Selected tracks are not
recorded.
• Copyright protected tracks cannot be
recorded.
•MP3 and WMA files cannot be
recorded.
• Copy from the computer onto the
internal HDD using Denon Music
Manager.
19
19
¢HDD
Recorded tracks are not
displayed.
•Track registration information may
not be displayed properly if recording
was not completely normally, if the
AC power cord was unplugged during
recording, etc.
• If the track registration information is
not normal, press the ON/STANDBY
button while pressing the
2 button
and the CD/HDD/USB/NET button
simultaneously with the CHR-F103 in
the standby mode. “Rebuild Index
Mode” is displayed.
Select “Yes” then press the ENTER
button to rebuild the information
registered on the HDD.
—
CD recording takes a lot
of time.
• Recording can take a long time if the
CD is scratched or dirty.
•Wipe the dirt off the disc or replace
the disc.
4
Symptom Cause Measures Page
You are not connected to
the network.
• The LAN cable is disconnected.
• (Server and CHR-F103) connected by
cross cable.
• Router’s or hub’s power is off.
• Network settings are wrong.
• Connect properly with a LAN cable.
• Connect properly with a LAN cable.
•Turn on the power of the router or
hub.
•Check the router’s or hub’s operating
instructions.
• Contact your line administrator or
provider.
12
13
13
—
—
¢NET
Sound is broken. • The sound may be broken depending
on the network environment.
• If the playback bit rate is high or the
server traffic is heavy, stop the other
applications running on the server.
13
No sound is produced. • Playback data is in a format with which
the CHR-F103 is not compatible.
28