Filter
Top Products
System Operations
32
ENGLISH
ENGLISH
System Operations
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
<
1
/
3
>
ON/STANDBY
2
This unit [CHR-F103]
ON/STANDBY
Receiver [DRA-F102/F102DAB]
ON/STANDBY
<TAPE 2>
Cassette deck [DRR-F102]
ON/STANDBY
[
CD
1
/
3
]
[
9
]
[
MENU
]
2
[TIME/DISPLAY]
[
HDD
1
/
3
]
[
NUMBER
]
(1~9, 0/10, +10)
When the CHR-F103 is used in conjunction with other components in
the F102 series, such system operations as CD Synchro recording can
be performed and the system remote control unit (included with the
receiver (DRA-F102/F102DAB)) can be used to operate the various
components.
• All of the system operations are controlled from the receiver (DRA-
F102/F102DAB).
• Also read the operating instructions of the various components.
• The system remote control unit included with the receiver (DRA-
F102/F102DAB) cannot be used to operate the CHR-F103. Use the
system remote control unit included with the CHR-F103.
Press [HDD 1/3] or [CD 1/3] when the power of the
various components is set to the standby mode.
• The power of the various components turns on and the receiver’s
function automatically switches to “CD/HDD”.
•Press [HDD 1/3] to play the hard disc drive, [CD 1/3] to play a CD.
The auto power on function does not work even when
<
1/3
>
is
pressed.
Auto power on function
Press
<
1/3
>
, [HDD 1/3] or [CD 1/3] during playback
on one of the other components.
• Playback stops and the receiver’s function automatically switches
to “CD/HDD”.
•Press
<
1/3
>
to play the function currently selected on the CHR-
F103, [HDD 1/3] to play the hard disc drive, [CD 1/3] to play a CD.
Auto function selection