Filter
Top Products
Setup
ENGLISH
ENGLISH
16
Recording monitor auto playback setting
(Store Monitor)
• Upon purchase this is set to “On”.
Use
<
JOG DIAL
>
or [
DD HH
] to select.
Press ENTER.
From the “Store Setting” mode, select “Store
Monitor” then press ENTER.
2
3
1
Off:
The sound being recorded is not automatically monitored (played).
On:
The sound being recorded is automatically monitored (played).
The following settings can be made:
£IP address setting (IP Address)
£Proxy setting (Proxy)
£Internet radio setting (Internet Radio)
Making the network settings (Network Setting)
¢Automatic setting of the IP address
When the router’s DHCP server function is enabled (setting for
automatically assigning IP addresses), the CHR-F103 can be used
as set upon purchase (“On” – DHCP server enabled).
Making the IP address settings (IP Address)
¢Manual setting of the IP address
If the router does not have a DHCP server function or it is disabled
and a fixed IP address must be set, make the setting described
below.
For the IP address and other information, contact your ISP
(Internet service provider).
Select “DHCP” then press ENTER.
Select “Off” then press ENTER.
• The manual setting mode is set.
From the “Network Setting” mode, select “IP
Address” then press ENTER.
2
3
1
Use
<
JOG DIAL
>
or [
DD HH
] to select the next setting
item, then press ENTER.
•IP Address
• Subnet Mask
• Gateway
• Primary DNS
• Secondary DNS
4
Use [NUMBER] (1 ~ 9, 0/10) to input all the places,
then press ENTER.
Repeat steps 4 and 5 to set all the items.
5
6
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
[
D
H
]
ENTER
<JOG DIAL>,
ENTER
ENTER
[
NUMBER
]
(1~9, 0/10, +10)
[
D
H
]