Denon CHR-F103 CD Player User Manual


 
Operation
ENGLISH
ENGLISH
14
Before operating
Operation
Press ON/STANDBY.
When the power turns on, the power indicator lights green.
¢Turning the power off (to the standby mode):
Press
<
ON/STANDBY
>
again.
The power indicator lights red while switching to the standby
mode.
The power indicator turns off once the standby mode is set.
NOTE:
When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
NOTE:
Playback of discs not conforming to CD standards (CDs with
copy control, for example), is not guaranteed.
Do not press the disc tray in by hand when the power is turned
off. Doing so could damage the set.
Do not insert foreign objects into the disc tray. Doing so could
damage the set.
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
ON/STANDBY
[
D
H
]
CD/HDD/USB/NET
BACK
SETUP
[TIME/DISPLAY]
MUSIC SEARCH
ENTER
<
5
>
CD/HDD/USB/NET
ON/STANDBY
<JOG DIAL>,
ENTER
BACK
SETUP
MUSIC SEARCH
ENTER
[
D
H
]
[
DIMMER
]
BACK
[
NUMBER
]
(1~9, 0/10)
Turning the power on
Selecting the function
With the CHR-F103, it is possible to switch playback between three
sources: music discs, the HDD and an external source (USB audio,
network audio, etc.).
Press CD/HDD/USB/NET to select the function of the
source to be played.
Playback of the selected function starts.
Listening to CD ( page 23)
Listening to HDD ( page 22)
Listening to USB/NETWORK ( page 26 ~ 29)
1
2
CD HDD USB/NETWORK
Loading discs
Press
<
5
>
to open the disc tray.
Load a disc.
When a CD is loaded, the album name, track name, etc., are
displayed automatically ( page 23).
1
2
If there are multiple data entries in the Gracenote
®
database
corresponding to that CD, “Select CD Info” is displayed. Use
<
JOG
DIAL
>
or [
DD HH
] to select the entry to be display, then press ENTER.
•To change the displayed information, stop playback and press BACK.