Bel Canto Design PReProTM Stereo Amplifier User Manual


 
Page 34© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
Specifications
DTS Digital Surround is a registered trademark of DTS Technologies, LLC. "Dolby", "AC-3", "Pro Logic"
and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Manufactured
under license from Dolby Laboratories Licensing Corporation.
AUDIO/VIDEO SECTION
Nominal Input Level 200 mVrms
Maximum Output Level 7.0 Vrms
Input Impedance 15K ohms
Total Harmonic Distortion less than 0.005 %
Frequency Response
Stereo Bypass mode 20 Hz to 20 kHz (± 0.05 dB)
Processed Channels Meets or exceeds the requirements of Dolby®
Digital and Dolby® Pro-Logic 2 DTS, DTS ES
Signal-to-Noise Ratio >105 dB CCIR-ARM
Digital Inputs 4 coaxial and 5 TosLink optical
Analog Inputs and Video inputs Analog AM/FM, CD, TAPE, AUX, 7 Audio/Video 2
with S-Video and 3 250 mhz Component. 5 with composite and
S-Video
Second Zone Select Zone 2 AUX, AM/FM, Tape, CD
Outputs 2 x Eight-Channel Audio (Left, right, surround left, surround right,
center, back left, back right, subwoofer), 2 Composite Video, 1 S-
Video , 1 component video
Record outputs 2 audio, 2 video, 2 S-Video and 2 digital audio
Second Zone Outputs 1 Fixed and 1 Variable Audio
Weight (lb / kg) 29 lb.
Dimensions (W x D x H*) 17.5" x 12.5" x 7.5"
TUNER SECTION FM AM
Range 87.5 - 108.1 MHz 520 - 1720 kHz
Usable Sensitivity 11.3 dBf @ 30 dB S/N (1.0 µV/75 ohm) 10 µV @ 20 dB S/N
50 dB Quieting Sensitivity 37 dBf Stereo (20 µV/75 ohm) --
Capture Ratio < 1.6 dB --
AM Rejection 60 dB --
THD at 1 kHz 0.1 % (Stereo) 0.5 %
I.F. Rejection 90 dB 35 dB
Image Rejection 80 dB 45 dB
Selectivity 58 dB 30 dB
S/N Ratio 74 dB (Stereo) 45 dB
Stereo Separation (at 1 kHz) 45 dB
--
*Features and Specifications are subject to improvements and changes without prior notice.