Filter
Top Products
Page 15© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
The main video out section accommodates 1-
Component, 1-S and 2-Composite connectors.
The Component connection will only output
video from each of the three component inputs.
S-Video inputs can be viewed from the S output
or composite outputs since the PRePro will down
mix S to COMPOSITE. The programming
MENU can be viewed from S-Video or
Composite video output. For best video quality
use component or S-Video connections when
available. The PRePro front panel monitor only
accepts a composite input for this monitor to
Video Monitor Connection
display a video input. You must connect an S
or composite video input signal from the
video source.
1. Connect the COMPONENT VIDEO OUT
of the PRePro to the COMPONENT
VIDEO IN of your monitor.
2. Connect S output to the monitor if any
input source is using an S-Video input. If a
source is using a COMPOSITE input, use
the composite video out to connect to the
monitor.
COMPONENT IN
COMPOSITE IN COMPONENT OUT
S-VIDEO OUT
COMPOSITE OUTS-VIDEO IN