Filter
Top Products
Page 18© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
To Change Input Assignment
a) Press the number of the input to be changed
from the DEFAULT settings, assignment will
blink.
b) To change a digital input assignment from the
current DIG # or ANALOG setting, press
SELECT button repeatedly until input assign-
ment scrolls to DIG3 or any desired input.
c) Press EXIT to store settings and return to the
main menu.
To Change Input Assignment Name
i) Press guide on the remote control, the rename
screen will come up. At the top the default
name for that input will be displayed, then the
current name and XXXXX for the new name.
ii) Use the curser arrows on the remote to move
up, down, right, left. When you have high-
lighted the desired letter, blank or numbers,
press select. Repeat this procedure until you
the new name is created. Use “blank” to
erase unused spaces.
iii) Press 1 to save name.
DEFAULT NAME- SAT
CURRENT NAME-SAT
NEW NAME- XXXXX
ABCDEFGHIJKLMN
OPQRSTUVWXYZ01
23456789_
1. CHANGE NAME
2. KEEP CURRENT NAME
3. USE DEFAULT NAME
EXIT
INPUT AUDIO
1 VCR 1 DIG 8
2 VCR 2 DIG 7
3 TV DIG 6
4 LD DIG 5
5 AUX DIG 4
6 SAT DIG 3
7 DVD DIG 2
8 CD DIG 1
9 TAPE ANALOG
EXIT