Filter
Top Products
Page 17© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
Digital Source Set-up & Connection
This section describes how to connect a digital
audio or video source, such as DVD, DISH, SAT,
GAME, CABLE BOX. We will use the SAT
INPUT and a satellite receiver as an example
for this instruction.
1. Using high quality video cable connect the
COMPONENT VIDEO OUT from the satellite
receiver to the SAT COMPONENT VIDEO
IN. Also connect a S-video cable to the input
so that the front panel screen can be used.
2. With a high quality optical conduit or coaxi-
al cable, connect the digital OUTPUT of the
satellite receiver to a digital INPUT on the
PRePro.
3. Turn on monitor and make sure the master
power switch on the left side of PRePro is
pressed in.
4. Press the SAT input key on the front panel
of the PRePro or provided remote control.
This will turn the unit on.
7. In the AUDIO INPUT menu SAT should be
set to the corresponding digital input.