Filter
Top Products
Page 30© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
Example for Programming a Macro
Sequence
To program the M1 button in the AVC mode
to power on the receiver, power on the CD,
power on the TV and power on the VCR:
Step 1.
Press the AVC button and MUTE buttons
simultaneously. Hold both buttons until the
red light under the AVC button turns on. The
red light will blink once during each subse-
quent press of a button.
Step 2.
Press the M1 button to select the M1 macro.
Step 3.
Programming the M1 macro button: Press
the AVC button to select the AVC Power
command. Press the CD Device button to
select the CD mode. Press the MUTE button
to select the CD Power command. Press the
TV Device button to select the TV mode.
Press the MUTE button to select the TV
Power command. Press the VCR Device but-
ton to select the VCR mode. Press the MUTE
button to select the VCR Power command.
Step 4.
Press the CH button. The red light under
the AVC button will blink twice and then turn
off indicating that the macro sequence has
been stored.
REMOTE CONTROL LEARNING MODE CONT.