Filter
Top Products
Page 28© 2002/2003 bel canto design, Ltd. PRePro User’s Guide rev1103
Erasing a Learned Command From a
Button
Step 1.
Press the Device button and SELECT buttons
simultaneously and hold until the orange
Status LED and the Device button turn on
and remain lit.
Step 2.
On the remote control, press the button that
is to be erased. The orange Status LED will
flash continuously and the Device button will
turn off.
Step 3.
Press the LIGHT button. The green status LED
will flash twice, then turn to a steady
orange. The Device button will turn on.
Repeat From Step 2 for any other buttons to
be erased in the selected Device mode.
Step 4.
To exit this feature, press and hold the
Device button and the SELECT button simul-
taneously once again. The orange Status
LED will flash twice and then turn off. The
Device button will turn off.
Erasing All the Learned Commands
in One Device Mode
Step 1.
Press the Device button and SELECT buttons
simultaneously and hold until the orange
Status LED and the Device button turn on
and remain lit.
Step 2.
Press and hold the LIGHT button. The red
Status LED will flash five times. Release the
LIGHT button. The Status LED will then flash
green twice and then the Device button will
turn off. The Status LED will go to a constant
orange indicating that all the learned infor-
mation on buttons in the Device mode have
been erased. The Device button will turn on.
Step 3.
To exit this feature, press and hold the
Device button and the SELECT button simul-
taneously. The orange Status LED will flash
twice and then turn off. The Device button
will turn off.
Erasing All of the Learned
Commands in All Device Modes
Press and hold the TV Device button and the
LIGHT button simultaneously. The red Status
LED will flash continuously. The Status LED
will then flash green once, orange once and
then turn off, indicating that all of the
learned commands on all of the Device
modes on the remote control have been
erased.
Warning: This procedure will erase all
learned commands on all buttons
in the CD, DVD, AUX, SAT, TV, VCR and
CBL device modes.
REMOTE CONTROL LEARNING MODE CONT.