Filter
Top Products
Jack Tripod
Assembly
Step 1
Step 2
Step 3
Step 4
31
Installation Procedures
Figure 26
Attach side plates to jack tripod assembly leg.
• Use 1 x 2-1/2 in (64 mm) bolt, lock washer and nut
Attach side plates to drum tab.
• Use 3/4 x 2 in (51 mm) bolt, lock washer and nut
Note: Keep angled corners of side plates toward drum assembly.
Refer to Figure 26. Assemble jack tripod by connecting tripod braces to tripod leg.
• Use 3/4 x 5-1/2 in (140 mm) bolts, lock washers and nuts
Attach jack tripod assembly braces to corresponding drum pivot/mount assemblies as
shown.
• Use 3/4 x 2 in (51 mm) bolts, lock washers and nuts