Filter
Top Products
Initial
System
Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
1 Turn off the unit power.
2 Press
.z:::
(OPEN)
to open the front panel, and then
remove it.
3 Press
RESET
with a ballpoint pen or similar pointed
object.
I
I I
~
I
9
I
RESET switch
Adjusting
Volume
Turn the
Rotary
encoder
until the desired sound is
obtained.
Lowering
Volume
Quickly
Activating the Audio Mute function will instantly lower the volume
level by 20 dB.
Press
~/RTN
to activate the MUTE mode.
The audio level will decrease by about 20 dB.
Pressing
~/RTN
again will bring the audio back to its
previous level.
Setting
the
Time
and
Calendar
1 Press and hold
FUNC./SETUP
for at least 2 seconds
to activate the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the GENERAL
mode, and then press
~/II/ENT.
Bluetooth H GENERAL H AUDIO H DISPLAY H
TUNER* H Bluetooth
* Only when HD Radio/SATRadio is connected.
3 Turn the
Rotary
encoder
to select Clock Adjust,
and then press
~/II/ENT.
4 Turn the
Rotary
encoder
to set year.
S Press
~/II/ENT.
6 Repeat steps 4 and 5 above to set month, day, hour
and minute.
7 Press and hold
FUNC./SETUP
for at least 2 seconds
to return to normal mode.
• Pressing
~
IRTN
returns to the previous SETUP mode.
•
If
no operation is performed
for
60 seconds, SETUP is canceled.
•
To
synchronize the clock to anotherclock/watch
or
radio time
announcement, press and hold
~
/11
lENT
for
at least 2 seconds
aftersetting the "hour". Minutes will reset to
00.
If
the display shows
over
"30"
minutes when you do this, the time will advance one
hour.
7-EN