Filter
Top Products
Speakers
Power IC ON : The speakers are driven by the built-in
amplifier.
Connecting to
an
External Amplifier
Power IC ON(Initial setting)/ Power IC
OFF
Front
right
Rear
left
Rear
right
Front
left
@):x:
Amplifier
~
@):x:
Amplifier
~
When an external amplifier is connected, sound quality can be improved
by stopping the power supply
of
the built-in amplifier.
Power
IC
OFF:
Use this mode when the line output of this unit
is
used to drive
an
external amplifier.
In
this
setting, the head unit's internal amplifier
is
turned
OFF
and can not drive speakers.
Sound (Beep) Guide Function
Beep ON (Initial setting)/ Beep
OFF
This function will give audible feedback with varying tones depending
upon the button pressed.
• Perform this setting before inserting a disc.
If
a disc has already been
inserted, remove itfirst.
(If
you use an MP3 changer, you have
to
change discs.)
Playing MP3IWMAJAAC Data (Play Mode)
CD-DA (Initial setting)/ CDDA&MP3IWMA
This unit can play back CDs containing both CD and MP3IWMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback
of
an enhanced CD may be difficult. In this case,
you can select playback
of
a single session only, containing the CD data.
When a disc contains both CD and the
MP3IWMAIAAC data, playback
starts from the CD data portion
of
the disc.
CD-DA:
Only the CD data
in
Session 1 can be played
back.
CDDA&MP3IWMA:
CD data, MP3/WMA/AAC files
in
mixed mode,
and multi-session discs can be played back.
Turning Mute Mode On/Off (INT Mute)
INT
Mute ON/
INT
Mute
OFF
(Initial setting)
If
a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
Setting the AUX Mode (V-Link)
AUX
IN ON/
AUX
IN
OFF
(Initial setting)
You
can input TV/video sound by connecting an optional Ai-NET/RCA
Interface cable
(KCA-l2lB)
or Versatile Link Terminal (KCA-4l0C) to
this component.
You
can change the AUX name display when AUX IN is set to ON.
Press
~/IlIENT
when AUX IN is set to ON, and select AUX Name
by turning the
Rotary encoder, then press
~
/11
lENT.
After that, tum the
Rotary encoder to select the desired AUX name.
If
the KCA-4l0C is connected, it is possible to select two AUX names.
•
Via
KCA-410C, up to 2 external devices with RCA outputcan be
connected. In this case, press
SOURCE/~
to select
AUX
mode and
then press
BAND
to select yourdesired device.
SPEAKER
~
~
Front
RIGHT FRONT
8
8
right
SPEAKER
8
8
RIGHT REAR
Rear
~
~
right
SPEAKER
~
~
LEFT REAR
Rear
8
8
left
SPEAKER
8
8
Front
LEFT FRONT
~
left
~
.
No sound is produced by the system when the power output is set
to
OFF.
Setting the Language Font (Language Set)
Language 1(Initial Setting)/ Language 2
You
can select between two types
of
language fonts.
Demonstration
Demo ON/ Demo
OFF
(Initial setting)
This unit has a Demonstration feature for the display with sound.
•
To
quit Demo mode, set to Demo
OFF.
Changer Name Setting
Changer (Initial Setting)/ USB / Portable
This setting is used when the head unit is connected to the USB Adapter
for MP3 (KCA-620M).
You
can set the name to be displayed on the unit
depending on the device to which the USB Adapterfor MP3
(KCA-620M) is connected.
Setting the External Digital Input (Digital AUX)
Digital
AUX
ON/ Digital
AUX
OFF
(Initial setting)
When an ALPINE Ai-NET compatible digital audio processor
(PXA-H70l) and a DVD player (DVE-5207) not compatible with
Ai-NET are connected, set Digital AUX to ON to enjoy 5.l-channel
surround sound.
Language 1 :
Language 2 :
Normal Font
European Font
• Press
SOURCE/~
, and select the D.AUX mode,
and
adjust the
volume, etc.
• Depending on the connectedaudio processor, DVDplayer sound
may continue to be output, even though the source is changedto
another one.
If
this occurs, set the DVD player's
power
to
OFF.
23-EN