Filter
Top Products
Setting
EQ
mode
This setting gives you a choice
of
5-band parametric, or7-band graphic
equalizer.
1 Press and hold
FUNC./SETUP
for at least 2
seconds to setup the Selection mode.
2 Turn the
Rotary
encoder
to select AUDIO mode,
and then press
~
III
lENT.
Bluetooth H GENERAL H AUDIO H
DISPLAY
H
TUNER* H Bluetooth
6 Press SOURCE/<b to set the bandwidth (Q).
Adjustable bandwidth: 1f 1.5, 3
7 To adjust another band, repeat steps 3 to 6 and
adjust all bands.
8 When the setting has been completed, select any
one of the
preset
buttons
(1
through
6),
press
and hold the desired preset buttons for at least 2
seconds.
9 Turn the
Rotary
encoder
to select PROTECT
YES/NO, and then press
~
III lENT to store the
adjusted contents.
Graphic
EO
10
After setting, press and hold
~/ESC
for at least 2
seconds to return to normal mode.
•
If
YES is selected, the adjusted contentsare protectedandstoredinto
the preset buttons. When you want to store the parameter into a
protectedprest!t button, "REPLACENOIYES" can be selected.
•
If
NO is selected, the preset is'stored.
• The frequencies
of
adjacent bands cannot be adjustedwithin 4 steps.
• This function
is
inoperable when
DEFEAT
is set to
ON
(page 13).
• While adjusting the Parametric EQ, you should consider the
frequency response
of
the connected speakers.
• The storedcontents are not deleted even when resetting the unit
or
disconnecting the battery.
• The stored contents can be recalled byperforming operation in
"Recalling the Stored Equalizer Curve" (page 15).
• Pressing
~
IRTN
when Parametric EQ is adjustedwill return to the
previous item.
•
If
MultEQ is turned on, the A.SELbutton is ineffective. For details,
refer to "Turning MultEQ
on/off"
(page 13).
•
If
no operation is performed
for
60seconds, the unitwill return to the
normal mode.
PROTECT
NO
PROTECT
YES
(Initial setting)
Parametric
EO
(Initial setting)
PEQ: 5-band Parametric
EO
(Initial setting)
GEQ: 7-band Graphic
EO
5 Press and hold
FUNC./SETUP
for at least 2
seconds to return to normal mode.
• Pressing
~
/RTN
during the procedure will return to theprevious
mode.
•
If
no operation is performed
for
60
seconds in the SETUP mode, the
setting mode is canceled.
• This function is inoperable when DEFEATis set to
ON
(page 13).
• Press
and
hold
~
IESC
for
at
least 2 seconds, the setting mode is
canceled.
* Only when HD Radio/SATRadio is connected.
3 Turn the
Rotary
encoder
to select EQ Mode, and
then press
~
III
lENT.
4 Turn the
Rotary
encoder
to select the desired
equalizer characteristic, and then press
~
III
lENT
.
Adjusting
and
Storing
the
Parametric
Equalizer
Curve
You
can modify the Equalizer settings to create a response curve more
appealing to your personal taste.
To
adjust the Parametric Equalizer
Curve, set the EQ mode to Parametric EQ. For details, refer to "Setting
EQ mode" (page
14).
1 Press A.SEL to recall the DSP adjust mode.
Media Xpander H Crossover H T.Correction H
Parametric EO/Graphic
EO
H Media Xpander
2 Turn the
Rotary
encoder
to select Parametric EQ
mode, and then press
~/II/ENT.
3 Press
BAND
to select the band to be adjusted.
Band1
~
Band2
~
Band3
~
Band4
~
Band5
~
Band1
4 Press
~
or
~
to select frequency bands.
Adjustable frequency bands:
20 Hz to 20 kHz (in 1/3 octave steps)
Band-1: 20
Hz-80
Hz (63 Hz)
Band-2: 50
Hz-200
Hz (150 Hz)
Band-3: 125
Hz-3.2
kHz (400 Hz)
Band-4: 315
Hz-8
kHz
(1
kHz)
Band-5: 800
Hz-20
kHz (2.5 kHz)
5 Turn the
Rotary
encoder
to adjust the level.
Adjustable level: -6 to +6 dB
Adjusting
and
Storing
the
Graphic
Equalizer
Curve
You can modify the equalizer settings to create a response curve more
appealing to your personal taste.
To
adjust the graphic equalizer curve,
set the EQ mode to Graphic EQ. For details, referto
'~Setting
EQ mode"
(page
14).
1 Press
A.SEL
to recall the DSP adjust mode.
Media Xpander H Crossover H T.Correction H
Parametric EO/Graphic
EO,
H Media Xpander
2 Turn the
Rotary
encoder
to select Graphic EQ
mode, and then press
~/II/ENT.
3 Press
BAND
to select the band to be adjusted.
Band1
~
Band2
~
Band3
~
Band4
~
Band5
~
Band6
~
Band7
~
Band1
Band-1 (63 Hz) / Band-2 (150 Hz) / Band-3 (400 Hz) /
Band-4
(1
kHz) / Band-5 (2.5 kHz) / Band-6 (6.3 kHz) /
Band-7 (17.5 kHz)
14-EN