Filter
Top Products
Radio
Presettlng
Stations
Manually
1 Press BAND repeatedly until the desired band is
displayed.
2 Press
anyone
of the station
preset
buttons
(1
through
6)
that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
Tuning
to
Preset
Stations
•
If
no stations are stored, the tuner will return to the original station
you were listening
to
before the auto memoryprocedure began.
1 Press BAND repeatedly until the desired radio band
is displayed.
2 Press and hold TUNE/A.ME for at least 2 seconds.
The frequency
on
the display continues to change while the
automatic memory
is
in
progress. The tuner will
automatically seek and store 6 strong stations
in
the
selected band. They will be stored into preset buttons 1to 6
in
order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored
in
preset location
NO.1.
Presetting
Stations
Automatically
• A total
of
18 stations can be stored in the preset memory (6 stations
for
each band; FM
1,
FM2 andAM).
•
If
you store a station in apreset memory which already has a station,
the current station will be cleared andreplaced with the new station.
1
Select the radio band and tune in a desired radio
sta~ion
you wish to store in the preset memory.
2 Press and hold, for at least 2 seconds,
anyone
of the
preset
buttons
(1
through
6)
into which you wish
to store the station.
o The selected station
is
stored.
The display shows the band, preset number and station
frequency memorized.
Rotary encoder
SOURCE/<!> BAND
~/ESC
Distance mode:
Both strong and weak stations will be automatically tuned
in
(Automatic Seek Tuning).
Local mode:
Only strong stations will be automatically tuned
in
(Automatic
Seek Tuning).
Manual mode:
The frequency
is
manually tuned
in
steps (Manual tuning).
4 Press
~
or
~
to tune
in
the desired station.
Holding down
~
or
~
will change the frequency
continuously.
1 Press
SOURCE/<!>
to select TUNER mode.
2 Press BAND repeatedly until the desired radio band
is displayed.
FM
1
~
FM2
~
AM
~
FM
1
3 Press TUNE/A.ME to select the tuning mode.
ox
(Distance mode)
~
LOCAL (Local mode)
~
MANUAL (Manual mode)
~
OX
(Distance mode)
• The initial mode is Distance mode.
Listening
to
Radio
~/II/ENT
TUNE/A.ME
Preset buttons
(1
through 6)
This unit cannot receive HD
Radio™
signals (digital terrestrial radio).
In order to activate the digital radio functions described below, an
optional HD Radio Tuner module must be connected through the
Ai-NET bus.
HD Radio™ Technology Manufactured Under License From iBiquity
Digital Corporation. iBiquity Digital and the HD Radio and HD
Symbols are trademarks
of
iBiquity Digital Corporation. U.S. and
Foreign Patents.
• The "DIGITAL" appears on the display when a digital radio station
which contains both audio and text information, is received.
•
If
Digital Seek is set to
ON,
the SEEKUP/DOWNjunctions only stop
on digital stationfrequencies while receiving HD Radio. Refer to
"Digital Seek ON/OFF Setting" (page 25).
8-EN