Filter
Top Products
~/II/ENT
SOURCEI<!>
BAND
~~IIJo
FUNC.lSETUP Select buttons
(1
through
6)
Controlling
CD
Changer
(Optional)
An optional 6-disc or 12-disc CDChanger may be connected to this unit
if
it is Ai-NET compatible. With a CD Changer connected to the
Ai-NET input
of
this unit, the CD Changer will be controllable from
this unit.
Using the KCA-400C (Multi-Changer Switching device) or the
KCA-410C (Versatile Link Terminal) multiple changers can be
controlled by this unit.
See "Multi-Changer Selection (Optional)" on page 32 for selecting the
CD Changers.
• The controls on this unit
for
CD Changer operation are operative
only when a
CD Changer is connected.
• The DVD changer (optional) is controllablefrom this unitas well as
the
CD changer.
1 Press SOURCE/<!>
to
activate the CHANGER mode.
• The source indicator varies depending on the connected source.
• Press
BAND
to
switch the Disc mode
in
the Changer mode.
2 Press
FUNC./SETUP
to
activate Disc Selection
mode.
Disc Select Mode Disc Select Mode *
~
~
(Disc
No.1-6)
(Disc
NO.7
-12)
Disc Select Mode
RPT/M.I.X. Mode
~
(Disc
No.1-6)
3 Press the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded in the
CD
Changer.
The selected disc number appears
in
the display and
CD/MP3 playback starts.
• Afterselecting the desired disc, you can operate in the same way as
for
the CDplayer
of
this unit.
For
details, please see the CDIMP3/wMAlAACsection.
* When a 12-disc CD changer is connected.
32-EN
Playing
MP3
Files
with
the
CD
Changer
(Optional)
If
you connect a changer compatible with MP3, you can play
CD-ROMs, CD-Rs, and CD-RWs containing MP3 files on this unit.
1 Press SOURCE/<!>
to
switch
to
the MP3 Changer
mode.
2 Press
anyone
of
the
disc
select
buttons
(1
through
6)
corresponding
to
one
of
the
discs
loaded in the
CD
Changer.
3 To pause playback, press
~/II/ENT.
Pressing
~/II
lENT again will resume playback.
• The unit can play discs containing both audio data and MP
3 data.
•
For
operating MP3 with an MP3 compatible CD Changer, refer to
"CDIMP3/WMAlAAC" pages
9
to
12.
Multi-Changer
Selection
(Optional)
Alpine's Ai-NET system will support up to 6
CD
Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used.
If
you use 1 Switching device, you can
connect up to 4 CD Changers.
If
you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1 Press SOURCE/<!> on
this
unit
to
activate the
CD
Changer mode.
Alternatively, press SOURCE
on
the remote control
(RUE-4202) to activate the CD Changer mode.
SOURCE
--"*"""'"-
.....
L..---!-..;.I----
BAND
2 Press
BAND
on
this
unit
or
the RUE·4202
to
activate
the
CD
Changer Selection mode.
The CD Changer Selection mode remains active for a few
seconds.
3 Press
BAND
until the desired
CD
Changer
indicator
appears on
the
display.
Alternatively press BAND
on
the Remote Control until the
desired changer indicator appears
on
the display.
•
If
the selected CD Changer is notconnected, the display will show
"NO CHANGER (No.)".
•
To
operate the selected changer, see "CDIMP3/WMAlAAC"
(pages
9 to 12).
•
For
further details about the external input (AUX) when using
KCA-410C, see "Setting the
AUX
Mode (V-Link)" onpage 23.