Filter
Top Products
SIRIUS mode:
Category
Name
Channel
No.lChannel
Name
iPod® (Optional)
Rotary encoder
~/II/ENT
SOURCEI<!>.....
~
~
4 5
GO
6
Setting
the
Auxiliary
Data
Field
Display
TITLE
Preset buttons
(1
through 6)
~/RTN
~/ESC
• The unit can be used with the fourth generation and above
iPod, iPod photo, iPod mini or iPod nano. iPod Shuffle cannot
be used, however.
• Touch wheel or scroll wheel type iPods without the dock
connector cannot be connected to the unit.
• The unit can be used with the following iPod versions.
Correct function of earlier versions cannot be guaranteed.
Fourth
generation
iPod:
Ver.
3.1.1
Fifth
generation
iPod:
Ver.
1.1.2
iPod photo:
Ver.
1.2.1
iPod mini:
Ver.
1.4.1
iPod nanD:
Ver.
1.2
• The unit cannot be used with software versions earlier than
"2006-06-28".
For
details about "iPod Software Update," refer
to the iPod Instruction Manual.
1 Press
SOURCE/<!>
to switch to the iPod mode.
TUNER
~
XM/SIRIUS*]
~
DISC
~
iPod*2
~
CHANGER*3
~
TUNER
*1
Only when
XM
Radio
or
Sirius Radio is connected.
*2 Only when the iPod is connected.
*3 Only when the CD changer is connected.
2 Press
~
or
~
to select the desired song.
Return
to
the beginning
of
the current song:
Press
~.
Playback
iPods usable with this unit
An iPod® can be connected to this unit by using the proprietary
ALPINE FULL
SPEEDTM
Connection Cable (KCE-422i)
(sold separately). When this unit is connected by using the cable, the
controls on the iPod are not functional.
Turn the
Rotary
encoder
to select the XM ADF
mode, and then press
~/II/ENT.
Turn the
Rotary
encoder
to select XM ADF ONI
OFF, and then press
~
III
lENT.
When setting to
ON,
Auxiliary Data Field
is
displayed by
pressing
TITLE (Refer to the "Changing the Display" section
page 28).
Press and hold FUNC./SETUP for at least 2
seconds to return to normal mode.
5
* Only when HD Radio/SATRadio is connected.
3
4
The
XM
Auxiliary Data Field (ADF) display can be switched
on
or
off.
There is no ADF function for the SIRIUS receiver.
1 Press and hold FUNC./SETUP for at least 2
seconds to select the SETUP selection mode.
2 Turn the
Rotary
encoder
to select the TUNER
mode, and then press
~/II/ENT.
Bluetooth H
GENERAL
H
AUDIO
H DISPLAY H
TUNER*
H Bluetooth
*1
When
ADF
is turned
OFF,
this information is notdisplayed (see
"Setting the Auxiliary Data Field Display" on page 29).
Displayed in
1 line when text amount is small.
*2 When the "Scroll Setting" (page 24) is set
to
"Auto", the display
cannot be switched bypressing TITLE. The display contents switch
alternately.
*3 Displayed only during instant replay.
• When the "Scroll Setting" (page 24) is set to "Auto", the display
scrolls continuously. When the Scroll Setting is set
to
"Manual," the
display scrolls only once afteranyfunction is performed (PRESET,
BAND, SEARCH, etc.). "Channel No."
and
"Calendar/Clock"
displays do notscroll.
• Depending on the model, the display may differfrom the one shown
above.
• Pressing
~
IRTN
returns to the previous SETUP mode.
•
If
no operation is performed
for
60
seconds, SETUP is canceled.
Fast backward:
Press
and
hold
~.
Advance
to
the beginning
of
the next song:
Press
~.
Fast forward:
Press
and
hold
~.
3 To pause playback, press
~
III
lENT
.
Pressing
~
III
lENT again will resume playback.
• A song playing on the iPod while it is connected to this unitwill
continue to playfrom where it was pausedafter disconnection.
29-EN