Changing Your Settings 137
4. As required, tap the checkbox beside each data type to
enable or disable synchronization.
5. Tap
Sync now
to synchronize all selected data. You can
tap
Cancel sync
to stop the synchronization at any time.
System
Motion
The Motion settings allow you to set up various Motion
activation services. For more information on using gestures,
see “Using Gestures” on page 28.
1. From the Home screen, tap ➔
Settings
➔
Motion
.
2. Tap the ON/OFF icon at the top of your
screen to activate Motion.
3. The following options are available. Tap an option to
activate the feature. A checkmark is displayed.
• Quick glance
: You can check key information at a glance by
reaching towards your device.
• Direct call
: The device will dial the currently displayed on-
screen Contact entry as soon as you place the device to your
ear.
•Smart alert
: Pick up the device to be alerted and notified of
you have missed any calls or messages.
• Double tap to top
: Double tap the top of the device to be
taken to the top of the current on-screen list.
•Tilt to zoom
: In a single motion, touch and hold two points on
the display then tilt the tilt the device back and forth to zoom in
or out (you must be on a screen where content can be
zoomed).
• Pan to move icon
: Touch and hold a desired application
shortcut icon or widget on the screen. Once it detaches, move
the device left or right to migrate it to a new location.
• Pan to browse images
:
Touch and hold a desired on-screen
image to pan around it. Move the device left or right to pan
vertically or up and down to pan horizontally around the large
on-screen image.
• Shake to update
: Shake your device to rescan for Bluetooth
devices, rescan for Wi-Fi devices, Refresh a Web page, etc.
• Turn over to mute/pause
: Mute incoming calls and any
playing sounds by turning the device display down on a
surface. This is the opposite of the Pickup to be Notified
Gesture.
