C1697M-B (11/08) 85
5. Click the check box of each service you want to allow this role to access.
6. To limit a role’s access, do the following:
a. Click the plus (+) for one of the services.
b. Select the Some option.
c. Click the check boxes of the specific roles, users, or scripts to which you want to grant access.
d. To restore access to all roles, users, or scripts, select the All option.
7. Repeat steps 6 and 7 for each system feature you want to assign to the role.
8. Click OK to confirm the change and exit the dialog box, or click Cancel to exit the dialog box without saving the settings.
SETTING SERVICE PERMISSIONS
To give a role permission to perform actions on the DVR5100 system:
1. Select the role you want to edit. Information about that role appears in the right pane of the Roles screen.
2. Click the Device tab (if it is not already selected).
3. Click the Modify button under Step 1 “Select device-specific services this role can access.” The Select Services dialog box appears (refer to
Figure 93).
Figure 93. Selecting Services
4. Click the check box of each service you want to add. The service list will vary depending upon the devices registered on your network.
5. Set the priority for each selected service if you want them to be different from the role’s overall default priority.
