60 C1697M-B (11/08)
CONFIGURING DEVICES
You can configure the DVR5100 and its devices under the Devices tab in the Setup screen. The left pane displays alarms, cameras, the DVR5100,
and relays. The right pane displays the currently selected device settings (located in the tree in the left pane).
You can only make changes to online cameras. If a camera is not currently on line, its icon appears with a red slash across it.
To access the Devices screen (if not already displayed), click Setup , and then click Devices (refer to refer to Figure 64).
Figure 64. Devices Screen
Selecting a Device
1. Click Setup , and then select Devices .
2. Select a device. When you select a device from the left pane, the related settings appear in the right pane.
If you change a device’s settings, and then select a different device before you click Apply, a dialog box appears asking if you want to save the
changes. Click Yes to save the changes, or click No to cancel.
• To expand one portion of the device hierarchy, click the plus (+).
• To expand the entire hierarchy, right-click the device tree in the navigation pane, and then select Expand All from the Shortcut menu.
• To collapse one portion of the device hierarchy, click the minus (–).
• To collapse the entire hierarchy, right-click the device tree, and then select Collapse All from the Shortcut menu.
Table G. Device Buttons
Icon Device Type
AlarmArray
Camera
DVR
Relay Array
System Logger
