C1697M-B (11/08) 65
Selecting Video Termination
Video termination lessens the effects of ghost images on the final device when several video devices are connected together in a chain.
Select “Video termination” to enable, or clear “Video termination” to disable.
Operating a Camera in Covert Mode
The video of a camera operating in covert mode does not display. For a camera to display video, covert mode must be disabled.
Select or clear the “Covert camera” check box to enable or disable covert mode.
Creating a Camera Group
1. In the Camera Groups selection box, click Add. The Set Camera Groups dialog box opens. By default, no camera groups are configured and
the Camera Groups list is empty.
2. Click New. The Add Camera Group dialog box opens (refer to Figure 69).
Figure 69. Add Camera Group Dialog Box
3. Enter a camera group name.
4. Click OK. The name of the camera group is added to the Set Camera Groups dialog box list. The check box for the new entry is automatically
selected (refer to Figure 70).
Figure 70. Set Camera Groups Dialog Box
5. Click OK. The entry is saved and the dialog box closes.
