C1697M-B (11/08) 67
4. Click “Add Cameras...” The Create Camera Group dialog box opens (refer to Figure 74). The location name is displayed in the Cameras pane.
The camera for which the camera group is created is automatically listed in the Assigned Cameras pane.
Figure 74. Create Camera Group Dialog Box
5. To add more cameras to the camera group:
a. In the Cameras pane, click a camera.
b. Click Add >>. The selected camera moves from the Cameras pane to the Assigned Cameras pane.
c. Repeat steps 5a and 5b for additional cameras.
NOTE: To remove cameras from the group, select the camera from the right panel, and then click Remove.
d. Click OK. The Pelco dialog box opens, prompting you to save the new group.
e. Click Yes to save the new group. The new group is saved and the Set Camera Groups dialog is displayed.
6. In the Set Camera Groups dialog box, click OK.
Deleting a Camera Group
NOTE: Once a camera group is deleted, it cannot be restored. The DVR5100 does not alert you that you are about to delete a camera group.
Apply or OK confirms the deletion; Cancel cancels the action and closes the Setup screen.
1. In the Camera Groups selection box, click to select the camera group you want to delete (refer to Figure 75).
Figure 75. Deleting a Camera Group
2. Click Remove. The camera group is removed from the Camera Groups list.
Modifying a Camera Group Name
1. In the Camera Groups selection box, click a camera group, and then click Add. The Set Camera Groups dialog box opens.
2. In the Set Camera Groups dialog box, click the camera group, and then click Rename. The camera group name is highlighted.
3. Modify the camera group name, and then click OK. The DVR5100 remote client dialog box opens and displays a message prompting you to
confirm the modification.
4. Click Yes to rename the camera group, or click No to cancel the change.
