Installing internal options in the scanner
You can customize your scanner connectivity and memory capacity by adding internal options.
When the printer is connected to the scanner, only the internal options in the scanner function.
Available internal options
• Memory cards
– DIMM
– Flash memory
– Fonts
• Firmware cards
• Lexmark
TM
Internal Solutions Ports (ISP)
Accessing the system board
Note: This task requires a flat‑head screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the scanner, then turn the scanner off, and unplug the power cord from the
wall outlet before continuing. If you have any other devices attached to the scanner, then turn them off as well,
and unplug any cables going into the scanner.
1 Move the scan bar to its home position.
a From the home screen, touch > Lock Scanner Head.
b Turn off the scanner and printer.
c Lock the scan bar.
Additional scanner and printer setup 34
