Printer had to restart. Last job may be incomplete.
From the scanner control panel, touch Continue to clear the message and continue printing.
For more information, visit
http://support.lexmark.com or contact customer support.
Reattach bin [x]
Try one or more of the following:
• Turn off the printer and the scanner, and then turn them back on.
• Reattach the indicated bin.
1 Turn off the printer and the scanner.
2 Unplug the power cord of the printer from the electrical outlet.
3 Remove the indicated bin.
4 Reattach the bin.
5 Connect the power cord of the printer to a properly grounded electrical outlet.
6 Turn on the printer and the scanner.
• Remove the indicated bin:
1 Turn off the printer and the scanner.
2 Unplug the power cord of the printer from the electrical outlet.
3 Remove the indicated bin.
4 Contact customer support at http://support.lexmark.com or contact your service representative.
5 Connect the power cord of the printer to a properly grounded electrical outlet.
6 Turn on the printer and the scanner.
• From the scanner control panel, touch Continue to clear the message and print without using the indicated bin.
Reattach bins [x] – [y]
Try one or more of the following:
• Turn off the printer and the scanner, and then turn them back on.
• Reattach the indicated bins:
1 Turn off the printer and the scanner.
2 Unplug the power cord of the printer from the electrical outlet.
3 Remove the indicated bins.
4 Reattach the bins.
5 Connect the power cord of the printer to a properly grounded electrical outlet.
6 Turn on the printer and the scanner.
• Remove the indicated bins:
1 Turn off the printer and the scanner.
2 Unplug the power cord of the printer from the electrical outlet.
3 Remove the indicated bins.
4 Contact customer support at http://support.lexmark.com or contact your service representative.
Troubleshooting 300
