Install Tray [x]
Try one or more of the following:
• Install the specified tray:
1 Turn off the printer and the scanner.
2 Unplug the power cord from the electrical outlet.
3 Install the specified tray.
4 Connect the power cord to a properly grounded electrical outlet.
5 Turn on the printer and the scanner.
• Cancel the print job.
• Reset the active bin.
Insufficient memory for Flash Memory Defragment operation [37]
Try one or more of the following:
• From the scanner control panel, touch Continue to stop the defragmentation and continue printing.
• Delete fonts, macros, and other data in the printer memory.
• Install additional printer memory.
Insufficient memory to collate job [37]
Try one or more of the following:
• From the scanner control panel, touch Continue to print the part of the job already stored and to begin collating
the rest of the print job.
• Cancel the current print job.
Insufficient memory to support Resource Save feature [35]
Install additional scanner memory or touch Continue to disable Resource Save, to clear the message, and to continue
printing.
Insufficient memory, some Held Jobs were deleted [37]
From the scanner control panel, touch Continue to clear the message.
Insufficient memory, some held jobs will not be restored [37]
Try one or more of the following:
• From the scanner control panel, touch Continue to clear the message.
• Delete other held jobs to free up additional scanner memory.
Troubleshooting 295
