Use To
Forward to
Fax
E‑mail
FTP
LDSS
eSF
Specify the type of recipient to which faxes will be forwarded.
Notes:
• Fax is the factory default setting.
• This menu is available only from the scanner Embedded Web Server.
Forward to Shortcut Enter the shortcut number which matches the recipient type (Fax, E-mail, FTP, LDSS,
or eSF).
Block No Name Fax
Off
On
Enable blocking of incoming faxes sent from devices with no station ID or fax ID
specified.
Note: Off is the factory default setting.
Banned Fax List Enable the list of blocked fax numbers stored in the scanner.
Holding Faxes
Held Fax Mode
Off
Always On
Manual
Scheduled
Fax Holding Schedule
Enable fax holding all of the time or according to set schedule.
Note: Off is the factory default setting.
Punch
Off
On
Specify whether prints are punched.
Note: Off is the factory default setting.
Staple
Off
1 staple
Specify whether prints are stapled.
Note: Off is the factory default setting.
Use To
Transmission Log
Print log
Do not print log
Print only for error
Enable printing of a transmission log after each fax job.
Note: “Print log” is the factory default setting.
Receive Error Log
Print Never
Print on Error
Enable printing of a receive error log following a receive error.
Note: Print Never is the factory default setting.
Auto Print Logs
On
Off
Enable automatic printing of fax logs.
Notes:
• On is the factory default setting.
• Logs print after every 200 fax jobs.
Log Paper Source
Tray [x]
Multipurpose Feeder
Specify the paper source used for printing logs.
Note: Tray 1 is the factory default setting.
Understanding the printer menus 201
